Q32題材履式拋丸保養機

◆品牌優點和缺點 Product features

本履帶拋丸機廠家好多類型，大中快速分娩鏜孔的表層防銹或拋丸精煉，進行清潔鏜孔可以是沒有怕碰撞試驗的單重在150kg之下的鑄件及熱操作件，機械既可單機版用，又可配線用. 是一種精密鑄造設備空間。

自主：將產品類件的加入再生膠履帶滾筒式中，工作人數按住“加載”圖標，拋丸室門氣動式啟用，拋丸整理慢慢，履帶持續加載，產品類件的快速地實現翻滾，全力拋丸器將拋丸速度拋噴到無法翻滾的產品類件的的表面上，產品類件的可仍然透亮地有整理。鋼丸進行履帶進去的溜孔流向錐齒輪減速機卸料管機，再將鋼丸卸料管到斗式發展機，經斗式發展機發展到破乳器，被破乳后保存備用。拋丸完后，拋丸室門自主啟閉，履帶換向，將產品類件的卸出。

人工：什么是服務器是借助高速路退回的風機葉輪將彈丸拋向履帶內連續性反轉的零件上，為了實現徹底清除零件的依據。它適比較適用于于各行各業業中的大型鑄件、鍛件、沖壓工藝件、傘齒輪、扭簧等件的清砂、防銹、去防氧化皮和接觸面武器鍛造。該機是總合境內外線技藝，節構設計發掘的新好產品，也是種徹底清除速率好、節構省油的suv、噪聲污染小、一整套的性好的徹底清除裝備。

This machine is suitable for various  large and medium-sized batch production of workpiece surface derusting or peen-forming strengthening, clean up the work-piece must be not afraid of the collision of the single is is 150 kg of the casting and heat treatment, the machine can not only a single use, and wiring use. Belong to casting machinery.

Automatic: the workpiece in rubber crawler roller, the operating personnel press "run" button,  shot room door close behind, pneumatic blast cleaning began to run forward, tracked, workpiece constantly, efficient and powerful shot peen-forming high-speed mixer trajectory to is back on the surface of workpiece, workpiece can completely evenly clear. Steel shot through the crawler sneak into the hole, then screw conveyor will be sent to the steel shot a hoist, a type of the hoist to ascend to the separator, separated by storage to use. Is shot ended, is shot room door open automatically, tracked reversal, discharged the workpiece.

Manual operation: This machine uses high-speed rotary projectile impeller will throw to turn over the workpiece in continuous caterpillar, so as to achieve the purpose of cleaning up the workpiece. It is used in the industries of small-sized castings, forgings, stamping, gear, springs, and a rust-removing, derusting, to oxide skin and surface strengthening. This machine is comprehensive technology, the development of domestic and foreign design new products, it is a kind of cleaning efficiency high, compact structure, the noise is small, systematic good cleaning equipment.

◆軟件基本特征 Product features

1.該設備用于了懸臂離心力式拋丸器，有著的使用壽命短長和節構方便等作用。

2.選用BE型隔離器，存在優良的隔離的效果和種植率，對提生葉尖有積極態度的反應。

3.主要采用袋式除塵設備器，灰塵廢氣濃度值小于歐洲國家法律規定的規格，大天地改善了運行者的勞動改造的環境。

4.分為抗刮硅橡膠履帶，拉低了對產品的觸碰及影響情況發生，拉低了電腦的低頻噪音。

1. The machine adopts the cantilever centrifugal peen-forming device, with long service life and simple structure.

2. The BE separator has the good separation results and higher productivity, which has positive effec to the blade.

3. The bag filter, dust emission concentrations below the standards prescribed by the state, have greatly improved operator working environment.

4. The wear-resisting rubber crawler, less on the collision and damage, reduce the noise of the machines.

◆常用范圍之內 Applicable scope

      壓鑄件、高精度儀器鑄件、高精度儀器鍛件等的徹底清除、光飾。的還原熱補救件、鑄件、鍛件的單單從表面脫色皮。氣彈簧的加強。擰緊件噴砂除銹和前補救。

1、參考德國企業八十五年間末的拋丸機廠家開始國內化研發。

2、用直聯強力拋丸器，遞送吸收率好，拋丸量大。

3、風選離心轉移設備、丸砂離心轉移率以上99%。

4、彈丸鋪蓋均勻分布，無拋丸衛生死角。

5、耐磨性能件動用時間長，修改短時間。

6、儀器低噪音污染工作。

7、組合件采用了繼小家電（或PLC）抑制，抑制柜、聲光報警器器報警器裝置，PC適用西門子PLC國產該品牌，基本原電子元器件適用西門子PLC全資國產該品牌操控很簡單、靠譜。

Die casting, precision casting, precision forging of cleaning, light ornaments. Remove heat-treated pieces, castings, forgings surface oxide skin. The  strengthening of the spring. Fasteners derusting and former processing.

1. Reference to Germany at the end of the ninety’s shot used the machine manufacturing.

2. The efficient direct coupling strength is shot, transfer the high efficiency, is shot amount is large.

3. Efficient wind separator, pill isolating rate of more than 99% of sand.

4. Projectile enclothe even, without peen-forming blind angle.

5. Wear parts of long service life, change quickly.

6. Low noise operation.

7. Electrical use relay (or PLC) control, control cabinets, sound and light alarm device, PC using mitsubishi brand,mainly by Siemens brand original device operation is simple, reliable joint venture.

◆最主要的技術性性能參數 Main technical parameters